Web Winches
Doleco USA winches comply with WSTDA-T3 and Canadian Standard 905 regulations. Available in different frame configurations to satisfy a variety of applications and load requirements. All winches shown below are right hand models unless otherwise specified.
- Black powder coat finishes are standard on all Doleco USA winches
- Stamped working load limit and Doleco name certify quality
- Everlast 500
- Bottom Mount Winches
- Sliding Winches
- Special Application Winches
- Lashing Winches
- Cable Winches
- Flatbed Accessories
Everlast 500
Any Doleco USA winch that is shown on the following pages is also available in an innovative Everlast 500 finish. For ordering this finish just change the prefix to 2812 (instead of 2810). For Everlast 1K use prefix 2811.
Four-Way Corrosion Protection
- Barrier Protection: Overlapping zinc and aluminum flakes provide an excellent barrier
- Galvanic Action: Zinc corrodes to protect steel
- Passivation: Metal oxides slow down the corrosion reaction of zinc and steel
- Self-Repairing: Zinc Oxides and carbonates migrate to the damaged area to repair and restore the coating
- Paintable: Due to the water based product
Advantages
- Thin: 5-7 microns
- Hydrogen Embrittlement Free Process: Coating does not require acid pickling or electroplating
- Bimetallic Corrosion Resistant: Aluminum flake eliminates the typical bimetallic cell of zinc coatings
- Solvent Resistant: Maintains corrosion resistance even following an intermittent heat shock
- Conductive: Contentration of metallic flake allows an electrical current to be passed
- Salt Spray Resistance: 1,000 hours
- Better than pure zinc: 3 times greater corrosion protection than pure zinc
Environmental Benefits
- No Toxic Metals: Free of nickel, cadmium, lead, barium and mercury
- Water Based: Free from dangerous solvents
- VOC Compliant: Under EPA RACT requirements
Everlast 500 Double L Standard Winch
| Weight: | 6.5 lbs / 2.9 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2812 0033 |
Bottom Mount Winches
Standard Weld-On
| Weight: | 9.6 lbs / 4.4 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0006 |
Storable Weld-On
| Weight: | 8.5 lbs / 3.9 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0016 |
Low Profile Side Mount Weld-On
| Weight: | 7.3 lbs / 3.3 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0020 |
Standard Portable with 2 Set Screws
| Weight: | 10.7 lbs / 4.85 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0008 |
Storable Portable with 2 Set Screws
| Weight: | 11.1 lbs / 5.0 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0007 |
Side Mount Low Profile, Portable with 2SS
| Weight: | 10.1 lbs / 4.5 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0009 |
Bottom Mount Standard Storage 2″ Spool
| Weight: | 10.4 lbs / 4.72 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0017 |
Bottom Mount Standard Storage 3″ Spool
| Weight: | 10.5 lbs / 4.77 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0018 |
Bottom Mount Standard Storage 4″ Spool
| Weight: | 12.5 lbs / 5.7 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0019 |
Sliding Winches
Standard C Track Slider
| Weight: | 7.7 lbs / 3.5 kg |
| WLL: | 6,000 lbs / 2,730 kg |
| Part No.: | 2810 0014 |
Storable C Track Slider
| Weight: | 8.3 lbs / 3.8 kg |
| WLL: | 6,000 lbs / 2,730 kg |
| Part No.: | 2810 0010 |
Low Profile C Track Slider
| Weight: | 11.8 lbs / 5.2 kg |
| WLL: | 5,000 lbs / 2,500 kg |
| Part No.: | 2810 0013 |
Standard Double L Track Slider
| Weight: | 6.5 lbs / 2.95 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0033 |
Storable Double L Track Slider
| Weight: | 9.5 lbs / 4.3 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0031 |
Low Profile Double L Track Slider
| Weight: | 7.0 lbs / 3.2 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0035 |
Standard Sliding W Track
| Weight: | 12.5 lbs / 5.7 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0037 |
Low Profile Sliding W Track
| Weight: | 11.5 lbs / 5.2 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0038 |
Slider F Style Winch
| Weight: | 9.5 lbs / 4.1 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0045 |
Standard U-Slider
| Weight: | 13.0 lbs / 5.9 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0044 |
Special Application Winches
Combo Winch, Recessed Box
| Weight: | 12.9 lbs / 5.9 kg |
| WLL: | 5,500 lbs / 2,530 kg |
| Part No.: | 2810 0021 |
3-Bar Low Profile Side Mount Weld-On
| Weight: | 13.3 lbs / 6.0 kg |
| WLL: | 6,000 lbs / 2,730 kg |
| Part No.: | 2810 0026 |
3-Bar Standard Weld-On
| Weight: | 14.6 lbs / 6.6 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0027 |
3-Bar Low Profile Portable with 2SS
| Weight: | 14.6 lbs / 6.6 kg |
| WLL: | 6,000 lbs / 2,730 kg |
| Part No.: | 2810 0028 |
Low Profile Combination Weld-On Side Mount
| Weight: | 10.9 lbs / 4.9 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0005 |
Standard Combination Weld-On
| Weight: | 10.6 lbs / 4.8 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0001 |
Low Profile Combination Leg Mount Winch
| Weight: | 8.7 lbs / 3.9 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0022 |
Lashing Winches
Lashing Winch with Double Hex Drive, 2 Mounting Holes
| Weight: | 3.8 lbs / 1.7 kg |
| WLL: | 3,335 lbs / 1,513 kg |
| Part No.: | 2810 0025 |
Cable Winches
Doleco USA cable winches are easy to use. Please ensure your cable WLL matches with the safe working load ratings of the winch.
We offer cable winches in right- and left-handed versions.
All products are labeled with UPC Code.
- Black powder coat finishes are standard on all Doleco USA winches
- Stamped working load limit and Doleco name certify quality
End Mount RH
| Weight: | 15.4 lbs / 7.0 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0003 |
End Mount LH
| Weight: | 15.4 lbs / 7.0 kg |
| WLL: | 5,500 lbs / 2,500 kg |
| Part No.: | 2810 0004 |
Flatbed Accessories
Doleco USA heavy duty cable assemblies with zinc plated chain anchir can be used on cable, combination and web winches with side washers to prevent binding. Made of top quality aircraft cable and 19″ Gr 70 anchor which meets NACM standard.
Cable Assemblies with Chain Anchor
| Size: | WLL: | Weight: | Part No: |
| 1/4″ x 30′ | 2,300 lbs. | 5.5 lbs./ 2.49 kg | 2370 0009 |
| 1/4″ x 33′ | 2300 lbs. | 5.9 lbs./ 2.68 kg | 2370 0010 |
| 7/32″ x 30′ | 1,867 lbs. | 4.9 lbs./ 2.22 kg | 2370 0011 |
| 7/32″ x 32′ | 1,867 lbs. | 5.1 lbs./ 2.31 kg | 2370 0012 |
| 5/16″ x 30′ | 3,300 lbs. | 7.9 lbs./ 3.58 kg | 2370 0013 |
| 5/16″ x 32′ | 3,300 lbs. | 8.4 lbs./ 3.81 kg | 2370 0014 |